Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However when you have double-pane windows that are anchored by internal beading it will be more difficult to take out the old panes and put in new ones. In this situation, you will need to find some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards will fall on the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window replacement near me. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap between the window and the door is large, you might want to use security screens that includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could be affected by a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. With an screwdriver, remove the hinges on the top and bottom and UPVC Window Repairs adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles could also become loose. Most often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and then perform a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazing-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens with a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It is an easy process but it can be easier to do when you have a person to assist in holding the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges may also become unbalanced due to wear, which can cause gaps between the frame and sash. If they are beyond repair, it might be necessary to have them realigned. The interlock, which is on the hinge side of the window and can also become misaligned, again it may be feasible to give them a clean but in certain cases, it may be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some sort of filler and can be placed on the top of your windowsill. They can keep your home warm by blocking out cold air.

With a little maintenance and repairs windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it could be cheaper to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.